1x Remote 2x Receiver DC 6V Dual Receiver Control Wireless Power Switch Set For Duck Decoys 6 Volt

USD 19.99

Description

Control 2 ducks with 1 Remote. Wire 2 of your decoys and control it at once with a single key chain FOB remote control  An easy to wire remote control ON OFF power switch in latching function , Simple DIY unit for any 6 volt DC - 12VDC power system. This turnkey unit is complete with a plug and play wiring harness for a Mxjo Duck Decoy.Optimized for use with 6V battery's, marine battery systems, power switch for low voltage DC power sources and solar panel lighting systems, direct replacement for Baby Mxjo Duck decoy, duck hunting mallard duck decoy, kids power car's ignition and lighting and a wide variety of DC 6 volt and equipment, DC LED lighting and low voltage power systems. Product Dimensions Length 1.94" Width 1.08" Height 0.57''   Plug and play wire harness for mxjo duck decoys Working voltage - 6 volt to 12 volt  50m range ( must be level surface ) - Thats over 100 feet !! Rated for up to 10A Standby drain <10mA 315MHZ operating frequency -108DBM receiving sensitivity Eliminate need for messy wiring and switches Can be used as a emergency kill switch 6 volt models can be used for mxjo/lucky duck decoys A lot of hardcore duck hunters are hacking this 12Vmonster remote control to work with a Lucky Duck Decoy - one of our coolest customers Ray R. has provided the wiring sequence to us so we could share with everyone. We hope this will help you save some time Lucky Duck Wiring Sequence1. Attach the 12Vmonster 6V +(red) to the lucky duck battery.2. Attach the 12Vmonster -(black) to the lucky duck battery. 3. 12Vmonster wire 01 (red) will not be used and should be taped off. 4. Cut the black wire going to the lucky duck motor. 5. Attach the 12Vmonster wire 02(black) to the black wire just cut , running to the motor. 6. Jumper 12Vmonster - wire (black) same wire in step 2 to the other black wire resulting from step 4.7. Turn luck duck switch to on position. 8. Use remote to turn lucky duck on/ off. Note: There are multiple versions of the lucky duck, the above is for reference only and should only be tried if you can understand electronics. If this does not work on your lucky duck, we cannot be responsible. Returns are also not accepted if the wiring harness has been cut and the product is no longer in sellable condition.