Z-Series ZV7 12" Subwoofer
Sundown AudioSundown Audio
4.0

Z-Series ZV7 12" Subwoofer

USD 1199.99

Description

The Z v.7 is the third step up in Sundown's 2025 "ultra-high excursion" sub-woofer lineup after the M and X v.4 series. All models (12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691597, D691598, and D741841) – the Sundown “mega-platform.” Please note – the Z v.7 is not available, aside from special orders, in 10s due to the motor size. We mate these new platform frames to a quad stacked 265mm (10.43”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). This is, by far, the largest motor we have ever produced on a Z series sub-woofer. The motor force factor (BL^2/RE) is ~50% higher than the previous generation Z v.6 series. This motor drives a 3.3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former. These new round wire coils use a special Sundown designed “fat wire” winding method to handle significant amounts of power and abuse. Based on Sundown's years of experience with the Z v.4, 5, and 6 series we've also improved the voice coil ventilation yet again. The Z v.7 features an entirely new and patent-pending airflow directing pole cap, six pole OD channels, SIXTEEN gap vents, and a cross-drilled / slotted top plate to keep the voice coil running cool under extreme conditions.The Z v.7 motor also features a 9mm thick magnet ID Faraday ring which is locked into both the top and back plates. This ring combined with an all-new pole-extension inductance sleeve gives the Z v.7 the most linear inductive performance of any mega-platform sub-woofer to date. As if all of this were not enough to cement the Z v.7as a legend... we were also able to achieve 42mm of one-way linear excursion by 70% BL with an extremely uniform curve via our extensively FEA optimized motor and 95mm long voice-coil winding length. The Z v.7 series was designed from the ground-up to become the new standard in the low-frequency / small, ported box sub-woofer category in this price range. They will work in the same enclosures that are commonly used for Sundown Audio's mega-platform sub-woofers. The Z v.7 series, like its other mega-platform brethren, is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion. Specs Coming Soon

Get a promo code on Z-Series ZV7 12" Subwoofer

You could save on Sundown Audio Z-Series ZV7 12" Subwoofer with a Sundown Audio promo code:

    Sundown Audio logo

    10% off

    133 uses
    high

    worked 4 days ago

    10% Off Storewide at Sundown Audio
View all Sundown Audio coupons and promo codes

More Sundown Audio Products

SDDN 12" Limited Edition Competition Subwoofer

SDDN 12" Limited Edition Competition Subwoofer

3,500 watts RMS Available in 10 through 18-inch versions Dual 1 ohm coils Mega V2 Cone Aluminum 3.3” x  80mm coil Dual 8 AWG terminals with dual-layer tinsel leads Custom cross-cut pole piece with Neodymium cap for increased output and thermal control 5-layer spider 1,336 oz (83.5 lbs) magnet with integrated thermal ventilation Optimized for 4th & 6th order enclosures Carbon cone upgrade available  Designed in-house by Sundown Founder Jacob Fuller, the 3,500-watt RMS SDDN is available in 10, 12, 15, and 18-inch models. Each unit boasts a massive 83-pound motor with integrated thermal ventilation, featuring a custom cross-cut pole piece with a Neodymium cap for increased output and thermal control. Sundown’s signature Mega V2 cone is paired with a five-layer spider, a 3.3” x 80mm aluminum voice coil (dual 1-ohm), and dual tinsel leads per eight-gauge terminal.  SPECIFICATIONS Re = 1.9304Fs = 33.2047Zmax = 42.5300Qes = 0.2230Qms = 4.6903Qts = 0.2129Le = 3.9838Diam =241.3000Sd = 45730.3524Vas = 14.6269BL = 29.0291Mms = 466.6183Cms = 49.2355Sensitivity 1w/1m = 85.5519 dBXmax = 35mm

USD 1349.99

X-Series v.3 15" Subwoofer

X-Series v.3 15" Subwoofer

RMS 2000 watts Dual 1 or 2 ohm voice coil Made for extremely deep bass Triple-stacked magnet 3” voice coil Hyper-extended pole Built to order Designed with an extended pole piece and an incredible four inches of peak-to-peak excursion, the X v.3 is engineered for ultra-deep bass and high power handling. Engineered to set a new standard in the low-frequency/small-ported-box subwoofer category, the X Series can also work in up to a 50% larger enclosure if you desire even more low-end extension.  The X v.3 series differentiates itself with its incredibly linear suspension, ensuring the lowest level of bass extension in a small enclosure while maintaining extremely low levels of distortion. Notably, the v.3 series features a much larger motor structure (220mm vs. 190mm on the V.1 series), improved motor ventilation, and an all-new Mega-Roll v.2 surround, providing a more linear and rugged update to the world-famous Mega-Roll v.1 surround design. Specifications T/S SPECS X V.3 15″ D1 X V.3 15″ D2 RE (Ohms) 1.4 3.2 FS (Hz) 31.418 31.423 VAS (L) 45.907 45.924 Qes 0.486 0.561 Qms 2.562 2.801 Qts 0.409 0.468 Le (mH)     BL (NA) 15.518 21.831 Mms (Grams) 423.721 423.436 Cms (uM/N) 60.563 60.585 Sens (dB @ 1w/1m) 86.5dB 85.9dB Enclosure Specifications X v.3 15 Sealed Enclosure N/A Ported Enclosure 4.25 cu ft Recommended Tuning 32hz Recommended Port Area 68 sq in Displacement 0.22 cu ft Depth 11.6" Outside Diam. 15.51" Cutout 13.83" Physical Dimensions Download Enclosure Designs .Zip File

USD 819.99

X-Series v.3 12" Subwoofer

X-Series v.3 12" Subwoofer

RMS 2000 watts Dual 1 or 2 ohm voice coil Made for extremely deep bass Triple-stacked magnet 3” voice coil Hyper-extended pole Built to order Designed with an extended pole piece and an incredible four inches of peak-to-peak excursion, the X v.3 is engineered for ultra-deep bass and high power handling. Engineered to set a new standard in the low-frequency/small-ported-box subwoofer category, the X Series can also work in up to a 50% larger enclosure if you desire even more low-end extension. The X v.3 series differentiates itself with its incredibly linear suspension, ensuring the lowest level of bass extension in a small enclosure while maintaining extremely low levels of distortion. Notably, the v.3 series features a much larger motor structure (220mm vs. 190mm on the v.1 series), improved motor ventilation, and an all-new Mega-Roll v.2 surround, providing a more linear and rugged update to the world-famous Mega-Roll v.1 surround design. Specifications T/S SPECS X V.3 12″ D1 X V.3 12″ D2 RE (Ohms) 1.4 3.2 FS (Hz) 37.098 37.235 VAS (L) 12.986 17.077 Qes 0.486 0.543 Qms 2.597 2.779 Qts 0.409 0.454 Le (mH)     BL (NA) 15.943 19.857 Mms (Grams) 378.626 285.817 Cms (uM/N) 48.611 63.922 Sens (dB @ 1w/1m) 83.2dB 84.0dB Enclosure Specifications   X v.3 12 Sealed Enclosure N/A Ported Enclosure 2.5 cu ft Recommended Tuning 32hz Recommended Port Area 40 sq in Displacement 0.2 cu ft Depth 10.4" Outside Diam. 12.68" Cutout 11.09" Physical Dimensions Download Enclosure Designs .Zip File

USD 519.99

X-Series v.3 12" Subwoofer *USED*

X-Series v.3 12" Subwoofer *USED*

This is a used product that has been professionally rebuilt here at Sundown Audio. It comes with a non-doa warranty only. That means they are guaranteed to work when you receive it but no further warranty afterwards. Let us know within 24 hours of delivery if this product has an issue. We will not warranty any used subwoofer after that time. These potentially have scratches & scuffs on the magnets/motors and will not be in new condition. RMS 2000 watts Dual 1 or 2 ohm voice coil Made for extremely deep bass Triple-stacked magnet 3” voice coil Hyper-extended pole Built to order Designed with an extended pole piece and an incredible four inches of peak-to-peak excursion, the X v.3 is engineered for ultra-deep bass and high power handling. Engineered to set a new standard in the low-frequency/small-ported-box subwoofer category, the X Series can also work in up to a 50% larger enclosure if you desire even more low-end extension. The X v.3 series differentiates itself with its incredibly linear suspension, ensuring the lowest level of bass extension in a small enclosure while maintaining extremely low levels of distortion. Notably, the v.3 series features a much larger motor structure (220mm vs. 190mm on the v.1 series), improved motor ventilation, and an all-new Mega-Roll v.2 surround, providing a more linear and rugged update to the world-famous Mega-Roll v.1 surround design. Specifications T/S SPECS X V.3 12″ D1 X V.3 12″ D2 RE (Ohms) 1.4 3.2 FS (Hz) 37.098 37.235 VAS (L) 12.986 17.077 Qes 0.486 0.543 Qms 2.597 2.779 Qts 0.409 0.454 Le (mH)     BL (NA) 15.943 19.857 Mms (Grams) 378.626 285.817 Cms (uM/N) 48.611 63.922 Sens (dB @ 1w/1m) 83.2dB 84.0dB Xmax 30mm 30mm Enclosure Specifications   X v.3 12 Sealed Enclosure N/A Ported Enclosure 2.5 cu ft Recommended Tuning 32hz Recommended Port Area 40 sq in Displacement 0.2 cu ft Depth 10.4" Outside Diam. 12.68" Cutout 11.09" Physical Dimensions Download Enclosure Designs .Zip File

USD 410.49

You May Also Like